Laser-785 Excitation Laser for Raman Spectroscopy-Ocean Optics-Biaoqi Electronics Technology Co.,Ltd

Contact an Biaoqi Applications Scientist

Product List

	QSpec

	OceanOpticsSpectrometer
	Fiber Optic Spectrometer Near-infrared Spectrometer Fluorescence Spectrometer Raman Spectrometer LIBS Spectrometer Oxygen Sensors System Plasma Spectroscopy Thin Film Reflectometry System SpecEl Ellipsometer System

	Light Sources
	Wavelength Calibration Sources Radiometric Calibration Source Ultraviolet Sources Near infrared Sources

New Product

*	PL-3000 Photoluminescence Spectrometer
*	GLIS-3000 GEM Luminous Imaging
*	bluLoop Multi-LED Light Source
*	HL-2000 Tungsten Halogen Light
*	LS-1 Tungsten Halogen Light So
*	DH-2000 Deuterium Tungsten Halogen&
*	Balanced Deuterium Tungsten Halogen
*	Miniature Deuterium Tungsten Haloge
*	D-2000 Deuterium Light Sources
*	High-powered Continuous-wave Xenon

Product

OceanOpticsSpectrometer>> Raman Spectrometer>>Laser-785 Excitation Laser for Raman Spectroscopy

Laser-785 Excitation Laser for Raman Spectroscopy

Shown: LASER-IP-LAB

The Laser-785 series is a line of continuous-wave lasers designed specifically for Raman spectroscopy.

These high-power excitation sources have integrated laser drivers and a thermoelectric coolers.

The Laser-785 series have narrow spectral lines, is compact and features hermetically sealed laser component make it optimal for industrial and medical applications.

Laser-785 Spectral Output

The Laser-785 has a narrow spectral line width of only 0.2 nm. We used the HR4000 High-resolution Spectrometer to capture the output of the Laser-785 as shown in the spectrum below.

LASER-785-IP-LAB 785 nm spectrum stabilized multi-mode laser with > 350mW of FC fiber-coupled output power	Starting at

LASER-785-LAB-ADJ 785 nm spectrum stabilized multi-mode laser with > 350mW of FC fiber-coupled output power	Starting at

LASER-785-LAB-ADJ-S 785 nm spectrum stabilized multi-mode laser with > 350mW of SMA-coupled output power	Starting at

LASER-785-IP-OEM 785 nm spectrum stabilized multi-mode laser with > 350mW of FC fiber-coupled output power	Starting at

Specifications

Dimensions:	110 mm x 89 mm x 53 mm
Weight:	600 grams
Noise:	<0.5% RMS
Output fiber:	100 µm @ 0.22 NA
Warm-up:	15 minutes
Temperature:	-10 °C to 40 °C
Stability:	<3% peak-to-peak in 8 hours
Humidity:	5-95% non-condensing
Laser life:	10,000 hours
Power consumption:	3.0 A @ 5 VDC
Power output (CW):	>500 mW
Peak wavelengths:	785 +/- 0.3 nm
Spectral line width:	0.2 nm (typical)
Rise time:	<500 msec
Control:	TTL modulation -- 0 to 100 kHz
Connector:	SMA 905